The Effect of Modification Methods on the Properties of Lentinus Tuber Regium Powders

Published: May 10, 2019

Authors

  • Kenneth C. Ugoeze Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, University of Port Harcourt, Port Harcourt, 500004, Rivers State, Nigeria
  • Nkemakolam Nwachukwu Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, University of Port Harcourt, Port Harcourt, 500004, Rivers State, Nigeria
  • Precious C. Anyino Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, University of Port Harcourt, Port Harcourt, 500004, Rivers State, Nigeria
Keywords
Modification, Properties, Lentinus Tuber Regium, Powders

Abstract

The current work considered the influence of methods of modification on the physical characteristics of Lentinus Tuber Regium (LTR) powders. The sclerotia of the LTR was pulverized to 250.0 μm and coded as native Lentinus Tuber Regium (NLTR-A). A 500.0 g of NLTR-A was submerged in 3.5 % w/v sodium hypochlorite and stirred continuously for 30.0 min. The resultant slurry was washed severally with purified water until it was neutral to litmus. The mass was dried in an oven at 60.0 °C for 2.0 h, pulverized (250.0 μm) and was noted as the modified Lentinus Tuber Regiumpowder (MLTR-B). Another 500.0 g of NLTR-A was extracted with 70.0 % v/v ethanol in a Soxhlet extractor. The resultant powder was dried at 60.0 o C for 2.0 h, micronized (250.0 μm) and coded as the modified Lentinus Tuber Regium powder (MLTR-C). Additional 500.0 g of NLTR-A was submerged in 600.0 mL of 0.5 N sodium hydroxide in a 1.0 L beaker and shaken constantly for 30.0 min. The subsequent material was splashed with purified water until the material was neutral to litmus. The mass was freed from water and introduced into 200.0 mL of 0.5 N hydrochloric acid. It was agitated for 30.0 min in a water bath at 100.0 °C. It was flooded in purified water until it was neutral to litmus. The product was dried to constant weight at 60.0 °C and pulverized (250.0 μm). The product was coded as the modified Lentinus Tuber Regium powder (MLTR-D). Generally, NLTR-A, MLTR-B, MLTR-C and MLTR-D were investigated for their organoleptic, solubility, pH, moisture studies, scanning electron microscopy (SEM), x-ray diffractometry (XRD), flow parameters and densities. The results showed that both the native and the modified powders were insoluble in water and most organic solvents. The pH of the derived powders was consistently higher. SEM and XRD revealed morphological differences in each of the derived powders, though, all the powders were non-crystalline. The respective modification methods brought about an improvement in the hydrophilic and flow properties of the modified powders when compared to the native form of LTR

References

  • Afieroho, O. E., and Ugoeze, K. C. (2014). Gas Chromatography-Mass Spectroscopic (GC-MS) Analysis of n-Hexane Extract of Lentinus Tuber Regium(Fr) Fr (Polyporaceae) Syn Pleurotus tuber regium Fr sclerotia. Tropical Journal of Pharmaceutical Research, 13(11), 1911–1915.https://doi.org/10.4314/tjpr.v13i11.20
  • Afieroho, O.E., Lawson, L, Adedokun, O. M., and Emenyonu, N. (2013). Antituberculosis and phytochemical investigation of the dichloromethane extract Pleurotus tuber-regium (fries) Singer sclerotium. Int. Res. J. Pharm. 4, 255–7.
  • Aletor, V.A. (1995). Compositional studieson edible tropical species of mushroom. Food Chem.; 54,256-268. https://doi.org/10.1016/0308-8146(95)00044-J
  • Alison, H. (2011). Pharmaceutical excipients – where do we begin? Australian Prescriber, 34(4), 112–114. https://doi.org/10.18773/austprescr.2011.060
  • Anderson, J.B. and Stasovski, E.(1992). Molecular phytogeny of Northern hemisphere species of Armillaria, Mycologia, 84, 505–516.https://doi.org/10.1080/00275514.1992.12026170
  • Anike, F. N., Isikhuemhen, O. S., Blum, D. and Neda H. (2015). Nutrient Requirements and Fermentation Conditions for Mycelia and Crude Exo-Polysaccharides Production by Lentinus squarrosulus. Advances in Bioscience and Biotechnology, 6, 526–536. https://doi.org/10.4236/abb.2015.68055
  • Ansel, H. C., Allen, L. V. and Popovich, N. G. (2005). Pharmaceutical Dosage Forms & Drug Delivery Systems, 8th ed; Lippincott Williams & Wilkins; 121–145.
  • Aulton, M. E. (2002). Pharmaceutics – The Science of Dosage Form Design, 2nd Ed; Churchill Livingstone; 113–138.
  • Bowen, F. E. and Vadino, W. A. (1984). A simple method for differentiating sources. Drug Dev. Ind. Pharm. 10, 505–511.https://doi.org/10.3109/03639048409041403
  • Carr, R. L. (1964). Evaluating flow properties of solids, Chemical Engineering, 72, 69–72.
  • Carstensen, J. T., and Chan, F. C., (1977). Flow rates and a repose angle of wet-processed granulations. J. Pharm. Sci., 66, 1235.https://doi.org/10.1002/jps.2600660907
  • Chen, T., Wong, K. H., Wu, H., Zheng, W., Wong, M. K., and Man, W. Y. (2013). Pleurotus tuber-regium Polysaccharide Functionalized Nano-Selenium Hydrosol with Anti-Tumor Activity and Preparation Method Thereof. United States Patent No: US9072669 B2. 1–16.
  • European Pharmacopoeia 7th Edition (2013). Monograph 2.9.36. Powder flow. Directorate for the Quality of Medicines of the Council of Europe, Strasbourg.
  • Hausner, H (1967). Friction conditions in a mass of metal powder. International Journal of Powder Metallurgy, 3, 7–13.
  • Ikewuchi, C. C., and Ikewuchi, J. C. (2008). Chemical profile of Pleurotus tuber Belgium (Fr) Sing’s sclerotia. Pacific J Sci. Technol. 10, 295–9.
  • Iwuagwu, M. A., and Onyekweli, A. O., (2002). Preliminary investigation into the use of Pleurotus tuber-regium powder as a tablet disintegrant. Tropical Journal of Pharmaceutical Research, 1(1), 29–37. https://doi.org/10.4314/tjpr.v1i1.14596
  • Jonathan, S. G., and Akinfemi, A. (2011). Chemical compositions of Zea mays cobs biodegraded by Lentinus subnudus and Pleurotus tuber-regium, BTAIJ, 5(1), 60–65.
  • Jones, T. M., and Pilpel, N. (1966). The flow properties of granular magnesia. J. Pharm. Pharmacol, 18,81–93. https://doi.org/10.1111/j.2042-7158.1966.tb07829.x
  • Kornblum, S. S. and Stoopak, S. B., (1973). A New Tablet Disintegrant Agent Cross-Linked Polyvinylpyrrolidone, J. Pharm. Sci. 62(1), 43–49. https://doi.org/10.1002/jps.2600620107
  • Manjunathan, J. and Kaviyarasan, V. (2011). Physicochemical Studies on Lentinus Tuber-regium(FR), A Indian Edible Fungus. International Journal of Pharmacy and Pharmaceutical Sciences, 3(2),60–63.
  • Michael, J., Tobyn G. P., McCarthy, I, John N and Staniforth, S. E. (1998). Physicochemical comparison between microcrystalline cellulose and silicified microcrystalline cellulose. Int. J. Pharm. 169,183–194.https://doi.org/10.1016/S0378-5173(98)00127-6
  • Nedderman, R. M., Tüzün, U., Savage, S. B., and Houlsby, G. T. (1982). The flow of granular materials-I:Discharge rates from hoppers, Chemical Engineering Science, 37, 1597–1609.https://doi.org/10.1016/0009-2509(82)80029-8
  • Odeku, O. A., Awe, O. O., Popoola, B, Odeniyi, M. A., and Itiola, O. A. (2005). Compression and mechanical properties of tablet formulations containing corn, sweet potato and cocoyam starches as binders. Pharm. Technol., 29(4), 82–90.
  • Okhamafe, A. O., and Azubuike, C. P. (1994). Direct Compression of low-cost cellulose derived from maize cob. J. Pharm Sci. Pharmacy Pract. 1, 26–9.
  • Okoye, E.I & Onyekweli, A.O (2016). Development and evaluation of Pleurotus tuber-regium-cornstarch composite as a direct compression multifunctional excipient, Int. J Pharm Invest. 6(1): 10-22. https://doi.org/10.4103/2230-973X.176461
  • Oso, B. A. (1977). Pleurotus tuber-regium from Nigeria. Mycologia, 69, 271–279. https://doi.org/10.1080/00275514.1977.12020058
  • Schulze, D. (2008). Powders and Bulk Solids; Behavior, Characterization, Storage and Flow. New York: Springer Berlin Heidelberg.
  • Schwedes, J. (2003). Review on testers for measuring flow properties of bulk solids (based on an IFPRI-Report 1999), Granular Matter, 5, 1–43.https://doi.org/10.1007/s10035-002-0124-4
  • Shangraw, R. F. Wallace, J. W., and Bowers, F. M. (1987). Morphology and functionality in tablet excipient for direct compression; Pharm. Technol., 11,136–143.
  • Summers, M. P., and Aulton, M. E. (2007). Granulation, In: Aulton ME, editor. Aulton’s Pharmaceutics: The design and manufacture of medicines, 3 Ed, Churchill Livingstone, Edinburgh, 410–424.
  • The Joint IPEC (2006). PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients.
  • The Pharmaceutical Codex (1994). Principles and Practice of Pharmaceutics, 12th ed. Walter L; editor. The Pharmaceutical Press, London, p. 696.
  • Ugoeze, K. C., and Nkoro, V. O. (2015). The Physico-Technical Properties of a Multicomponent Lentinus tuber regium Based Co-processed Excipient (Fizlent). American Journal of Pharmacy and Pharmacology. 2(3), 13–20.
  • Ugoeze, K. C., Nkoro, V. O., and Nwachukwu, N. (2015). Application of a Multicomponent Lentinus tuber regium Based Co-Processed Excipient (Fizlent) as a Novel Directly-Compressible Filler-Binder-Superdisintegrant in Ibuprofen Tablet Formulation. American Journal of Biomedical Science and Engineering. 1(4), 45–50.
  • Ugoeze, K. C., and Okpara, C. (2015). Characterization of a novel co-processed powder of Lentinus tuber regium and polyvinylpyrrolidone (Povilent). International Research Journal of Pharmaceutical and Applied Sciences 5(2), 15–21.
  • Ugoeze, K. C., Nwaokenye, C. and Ibezim, C. N. E. (2013). Studies on the disintegrant and drug release rate enhancing properties of admixtures of corn starch BP and Lentinus tuber-regium powders in wet granulated paracetamol tablet. African Journal of Pharmaceutical Research and Development 5(2),83–90.
  • Zeleznik, J. A., and Renak, J. L. (2001). Flow and compact properties of dibasic calcium phosphate blended with microcrystalline cellulose and silicified microcrystalline cellulose: a paper presented at the American Association of Pharmaceutical Scientists Annual Meeting and Exposition, Denver, Colorado.
  • Zhang, M., Zhang, L., Cheung, P. C. and Ooi, V. E. (2004). Molecular weight and anti-tumor activity of the water-soluble polysaccharides isolated by hot water and ultrasonic treatment from the sclerotia and mycelia of Pleurotus tuber-regium. Carbohydr Polym. 56,123–8.https://doi.org/10.1016/j.carbpol.2004.01.005

How to Cite

Kenneth C. Ugoeze, Nkemakolam Nwachukwu, Precious C. Anyino . The Effect of Modification Methods on the Properties of Lentinus Tuber Regium Powders. J. Pharm. Technol. Res. Manag.. 2019, 07, 23-30
The Effect of Modification Methods on the Properties of Lentinus Tuber Regium Powders

Current Issue

PeriodicityBiannually
Issue-1May
Issue-2November
ISSN Print2321-2217
ISSN Online2321-2225
RNI No.CHAENG/2013/50088
OA Policy

Publisher's policy of the journal at Sherpa UK for the submitted, accepted, and published articles. Click OAPolicy

Plan-S Compliance

To check compliance, one has to use the Journal Check Tool (JCT). This tool provided by cOAlition S (European funders) for the researchers (fundee) to check the compliance with the journal.

Recommend journal to your library

You can recommend the journal being a researcher or faculty member to your library. We will post a copy of the Journal to your library on your behalf at free of cost.
Click here: Recommend Journal

Preprint Arxiv Submission

The authors are encouraged to submit the author’s copy (preprint) to appropriate preprint archives e.g. https://arxiv.org and/or on https://indiarxiv.org or institutional repositories (e.g., D Space) before paper acceptance by the editor of Journal. After publications of the paper author(s) should mention the citation information, title and abstract along with DOI number of the publication carefully on the required page of the depository(ies).

Contact: Phone: +91-172-2741000, +91-172-4691800

Email : editor.jptrm@chitkara.edu.in;

Abstract and Indexing

Information

This work is licensed under a Creative Commons Attribution 4.0 International License.

Articles in Journal of Pharmaceutical Technology, Research and Management (J. Pharm. Tech. Res. Management) by Chitkara University Publications are Open Access articles that are published with licensed under a Creative Commons Attribution- CC-BY 4.0 International License. Based on a work at https://jptrm.chitkara.edu.in/. This license permits one to use, remix, tweak and reproduction in any medium, even commercially provided one give credit for the original creation.

View Legal Code of the above-mentioned license, https://creativecommons.org/licenses/by/4.0/legalcode

View Licence Deed here https://creativecommons.org/licenses/by/4.0/

Creative Commons License

Journal of Pharmaceutical Technology, Research and Management by Chitkara University Publications is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at https://jptrm.chitkara.edu.in//

Members